10 Best Main Board For 3d Printer In 2022 – Expert Review

In today’s market, what’s the main board for 3d printer available today? It’s normal for customers to become overwhelmed while trying to discover a suitable brand for shopping due to the abundance of possibilities. There are far too many options on the market, many of which are low-quality knock-offs.

For your convenience, we’ve compiled a list of ten various main board for 3d printer brand possibilities that we’ve examined and researched in order to assist you in making an informed decision.

10 main board for 3d printer: Editor Recommended

10 main board for 3d printer Review:

1. BIGTREETECH SKR 2 Silent Board Motherboard 32bit SKR V1.4 Turbo New Upgrade Controller Board Support TMC2209/TMC2208 Drivers for BIQU B1 Ender 3 V2 Ender 3 Pro 3D Printer DIY Mainboard

Features :

  • 🌻【32Bit Higher Performance Microprocessor】SKR 2 silent Main board adopts 32 bit ARM level Cortex-M4 series STM32F429VGT6,180MHz frequency microprocessor, which totally a new upgrade Motherboard of SKR V1.4 Turbo/SKR V1.4.
  • 🌻【On-Board SPI and UART mode of TMC driver 】SKR 2 controller baord on-board TMC-driver SPI working mode and UART working mode, the on-board homeless sensor function,then SKR 2 can be used by simply pull and insert the jumper.
  • 🌻【Multiple Function】SKR 2 Support resume printing while power of,filament break detection and automatic shutdown after printing function.In the meanwhile,it can support serial screen, SPI screen and LCD screen like TFT2.4/TFT70/TFT3.5 inch colorful display and 2004LCD/12864LCD.
  • 🌻 【Thermal runaway protection】When the main control chip is damaged or the MOS tube of heater is out of control, then it will be effectively to cut off the power supply of the heater in time.
  • 🌻【Firmware Update 】Our SKR 2 board comes without SD card, then please use your own SD card to download firmware of motherboard through our GitHub website in the third picture, copy and save it to SD card. firmware must be reserved ,then re-plug the SD card and wait to 10s.The firmware has been successfully updated when the progress bar and interface appear.

Additional Info :

2. Creality BL Touch V3.1 Upgraded Auto Bed Leveling Sensor Kit for Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5/Ender 5 Pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer

Features :

  • 【Wide Application】New upgraded Creality BL Touch V3.1 works for Creality Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3S/Ender 3 MAX/Ender 5/Ender 5 Pro/CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard (Note: Only applicable to the above 3d printers with 32-bit motherboard).
  • 【Easy Firmware Upgrade】Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • 【Easy Installation And Usage】With 3 different mounting brackets can be installed on multiple 3d printers. BL-Touch sensor is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print.
  • 【High-precision】The standard deviation of BL-Touch is only 0.005mm, making leveling more convenient. BL Touch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface and automatically adjust. It could work with any kinds of bed materials, such as ABS, PLA, glasses, woods, metals, plastic and so on.
  • 【After-sales Service】Our package was included 1 set of auto bed Leveling Kit and an another replacement probe. Simple, smart and easy to install. If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

Additional Info :

3. Creality 3D Printer Sermoon D1 DIY 3D FDM Dual Zaxis Printer Silent Mainboard Transparent Enclosure Box Printer Enclosed Runout Sensor Used in Education Art Architecture

Features :

  • Enclosed Machine: with printing accuracy +-0.1mm,Our safe and stable Sermoon D1 printer enclosed machine supports high-temp filaments,and sermoon D1 with DIY features you unprecedented experience
  • Indulge yourself with 3D printer: Modular structure to experience the enclosed new tech machine,Hand-assembled to get a safe and cubic printer,Enjoy DIY fun
  • New Technology:Ther silver gray color,arc adge and smooth lines,simple appearance leaves a deep impression,broadly used in education, Handcrafted arts, architecture, industry.
  • Stable and Quiet:Equiped with Dual-Z axis screw,silent mainboard, Smart extrusion, smart sensor, Semi-closed sheet metal base features higher stability, provides a silent printing environment,
  • Tansparent Design: Aluminum alloy frame with tranparent double-door design is convenient for monitoring the printers in all view

Additional Info :

Item Dimensions
Height 20.90547
Width 19.685
Length 19.685
Weight 45.19476371

4. MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

Features :

  • 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
  • Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.
  • Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
  • Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
  • Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.

Additional Info :

Item Dimensions
Height 0.79
Width 3.35
Length 4.33
Weight 0.220462262

5. Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

Features :

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.

Additional Info :

Color MKS Gen L V1.0 3D Printer

6. Upgrade Creality BLTouch V3.1 Auto Bed Leveling Sensor Kit for Ender 3 V2/Ender 3/Ender 3 Pro/Ender 5/Ender 5 Pro/CR-10 with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printer, Low Power

Features :

  • WIDELY APPLICATION: Our Upgraded Creality BL Touch V3.1 fits for Creality Ender 3 V2 / Ender 3 / Ender 3 Pro / Ender 3S / Ender 3 MAX / Ender 5 / Ender 5 Pro / CR-10 with 32 bit V4.2.2 or V4.2.7 mainboard.(Note: Only applicable to the above 3d printers with 32-bit motherboard)
  • LOW POWER CONSUMPION: In standby mobe, no matter whether it is pulled out or retracted, the standby current of solenoid valve without current flow is less than 15ma, while in working mode, it suddenly rises to 100ms/300ma. Low power consumption and avoiding heating problems. Please keep away from magnetic components such as strong magnet motor and fan for installation.
  • EASY TO INSTALL AND USE: Download the BL-Touch firmware and copy it to the TF/SD card from the Creality official website, directly insert into the 3D printer card slot to update the program. No more need to use the ISP burner, which is more convenient to use.
  • HIGH-PRECISION: BLTouch auto bed leveling sensor fulfilled simple structure and high precision by using progressively designed solenoid and Hall Effect control. BLTouch’s Standard Deviation in repeatability is around 0.005mm that make it easier to use and to increase the success rate of shaping. Therefore, the platform board can be selected at will. Compatible with ABS, PLA, glass, metal, plastic and all meterials.
  • STRONG COMPATIBILITY: With 3 different mounting brackets can be installed on multiple 3d printers. 3D printer auto level is small in size and simple in structure, printing when connected. it can accurately measure the inclination of the hot bed and automatic compensation of Z axis, easily avoid the printing failure caused by uneven hot bed, so as to stable print. If you have any question, please feel free to contact us!

Additional Info :

7. BIGTREETECH BLTouch V3.1 Auto Bed Leveling Sensor + 2 Types Extension Cable Compatible for Ender 3 V2/Ender 3/Ender 3 Pro/Ender 3 Max/Ender 5/Pro with 32 Bit V4.2.2/V4.2.7 Main Board 3D Printer

Features :

  • 🎅【High-performance Kit】 Automatic bed leveling kit, can easily realize automatic bed leveling,bl touch sensor can be perfectly applied to any surface,can automatically adjust the plane,metal/wood/glass/etc.
  • 🎅【High Precision】 The accuracy difference of the table is very small, about 0.005mm.The 3D printer automatically detects the surface of the bed and automatically adjusts the perfect distance.
  • 🎅【Premium Combination】 Our package includes 1 set of automatic bed leveling kit and 2 types extension cables.
  • 🎅【Widely Application】 Suitable for 32-bit V4.2.2 Creality/Ender 3 /Ender 3 V2/Ender 3 MAX/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR-10.
  • 🎅【For More Information】 Please check out the antclabs website, or contact us through Amazon, we will send you file within 24h.

Additional Info :

8. Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

Features :

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you.
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing.
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect.
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament.
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!

Additional Info :

Color Classic Black
Item Dimensions
Height 7.87401574
Width 14.960629906
Length 20.866141711
Weight 18.518830008

9. BIGTREETECH SKR Pro v1.2 32-bit Motherboard high-Frequency 3D Printer Control Board, Support TMC5160, TMC2208, TMC2130, TFT28, TFT32, TFT35, 12864LCD ect.

Features :

  • The main control uses the ARM-level Cortex-M4 series with a 32-bit dominant frequency of 168 MHz STM32F407ZGT6 chip, performance is greatly improved.
  • Equipped with highly modular open source firmware Marlin2.0, it is convenient for users to DIY and further-development, to avoid the worry of not being able to master the core code.
  • Motor driver support :TMC5160,TMC2208,TMC2130,ST820,LV8729, DRV8825,A4988, etc.Display screen support: BIGTREETECH- 2.8 inch TFT,BIGTREETECH-3.5 inch TFT, LCD2004,LCD12864.
  • Support Serial WIFI Online Printing. 6 motor drives, 3 extruders, 3 CNC fans. Reserve extended ports of BL Touch, PWM, ADC, UART, I2C and SPI;Support power-off continuous printing, material cut detection, shutdown and other functions;Support for dual Z axis printers (series dual Z.

Additional Info :

10. Official Creality 3D Ender 3 Pro Silent Motherboard V4.2.7 Upgrade Mute Mainboard with TMC2225 Driver for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5

Features :

  • New Upgraded V4.2.7 Motherboard Compatible with Ender 3, Ender 3 Pro, Ender 3 V2, Ender 5. NOTE: It only preinstalls the Ender 3 Pro firmware, if you want to install it in your Ender 3, Ender 5 or Ender 3 V2, need to flash the Ender 3 / Ender-5/Ender 3 V2 firmware.If you need the firmware, please contact us freely. Ender-3 / Ender-3 Pro/ Ender 5 use the same mainboard but different firmware, please select the type you need. For Ender 3 Pro, You just plug and install them in and start operate!
  • New Upgrades: The microcontroller is upgraded from 8-bit to 32-bit, the running speed is obviously accelerated; the noise is lower and the precision is higher. Increase material breakage detection and automatic leveling function.
  • Driver: TMC2208 driver & Marlin 1.1.9 for V1.1.5 mainboard while TMC2225 driver & Marlin 2.0.1 for V4.2.7 mainboard. Bootloader preinstalled on both version boards.
  • Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem. Eeay to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor. Voltage: Support 24V input voltage.
  • Update Firmware: If the board you received is V1.1.5 please flash firmware with ISP cable. If the board you received is V4.2.7, please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.

Additional Info :

Color Black

Important Aspects to Consider When Choosing main board for 3d printer:

How we Picked the Top main board for 3d printer

Most of the items mentioned are not hand-picked. The list was generated by AI. But we can guarantee that every product included here has been tried and tested by real people, reviewed by experts, and recommended by real people.


Cost and performance are essential factors to consider when acquiring a main board for 3d printer. More enterprises entering the main board for 3d printer market means more options for quality and performance. The most expensive main board for 3d printer does not always indicate the best decision for you and your money. Many low-cost models offer excellent performance and comfort.


A brand with high-quality products and outstanding customer service is the ideal choice for main board for 3d printer. Good brand products are created with extreme care and precision, and they will always be available to answer your questions, correct any product flaws, or refund your money if any damage is found.


Before you click the buy now button or add items to your shopping cart, make sure the product fulfills your requirements.
Specs matter while choosing a product. They define the product’s capabilities. With so many options available, it’s vital to pick the correct one.
Choose the main board for 3d printer precision-engineered to fit your demands.
Performance, features, and affordability are the three primary factors to consider when comparing specifications. Each of these criteria has a role in your final choice. Considering all of them ensures you got the most value for money.


The world is filled of great main board for 3d printer, making it difficult to choose. A decision can be made by looking at the design. Materials used in manufacture, color scheme, and even visual weighing all contribute to a product’s overall design. Knowing this can help you locate a product that exactly meets your tastes and demands.

Customer Ratings

Many individuals consider customer reviews while making purchase selections. It’s easy to see why: who knows a product better than those who have used it? When deciding which product to buy, looking through customer reviews can give you a good indication of how others felt about their experience. Not everyone will enjoy every product, and some people will be more likely to post a review than others. Overall, customer evaluations are a good reflection of how happy people are with a product.

Stability and Control

We weighed the stability and control of a main board for 3d printer in determining its performance.
Keep in mind the item’s stability and control.
We consider the product’s impact on our lives and how we will feel when utilizing it.


Nobody likes to be uncomfortable or constrained when doing what they love. When deciding whether to use a product, consider its comfort main board for 3d printer. There are various sorts of main board for 3d printer that provide stability, control, and comfort. If you buy a fishing kayak, you don’t want to spend the whole trip thinking about how badly you want to get out because your back hurts or your feet are tired.


The manner a main board for 3d printer is designed and built, as well as the material used, determine its durability. Select the main board for 3d printer that can tolerate wear, pressure, and damage.

Also, make sure it has a streamlined style that fits everywhere. A busy mom or a construction worker will appreciate this product’s durability.

What Are Today’s Most Popular main board for 3d printer Models?

There are many main board for 3d printer items accessible today for men and women seeking quality and reliability. Every main board for 3d printer model follows the same essential premise. But they appeal to various users.
It’s no secret that certain products appeal to specific populations. What if you could see which products were the most popular across all consumers? You can, and we’ve got the list. Check out our collection of products that appear to appeal to all ages, genders, and locations.

How to Choose the Most Popular main board for 3d printer

The three most crucial criteria to consider are price, quality, and popularity.
Price is an obvious factor to consider, as you want to ensure it is acceptable for your needs.
Quality should also be examined because buying a low-quality goods will not help you achieve your main aim of obtaining the best product.
Finally, while not as obvious as price or quality, popularity can be just as significant as both when it comes to attracting new customers.


1: How much is main board for 3d printer?

main board for 3d printer come in a variety of designs and pricing ranges. It’s difficult to predict product costs nowadays. You don’t know how much something costs because the pricing range is so vast. For example, a pair of pants can range from $20 to $200 depending on where you buy them. Similarly, additional goods like as main board for 3d printer.

2. Is main board for 3d printer worth it?

We are, without a doubt, a disposable civilization. We’re continually assaulted with ads advertising the latest and greatest main board for 3d printer. But are they main board for 3d printer worth our money? Some of them are if you pick wisely! Some, not so much.

3. Is it time to get a new main board for 3d printer

You’re looking for a new main board for 3d printer. What do you think? It’s difficult to predict future price changes. If there are no signs of production slowing, it can be worth buying now to enjoy your investment sooner. But if output is declining and prices are predicted to rise, you might want to wait until the buzz has died down before making a choice.

4. What is the main board for 3d printer?

Sorry if you’re perplexed. I know it’s not an easy choice! But it’s one of the most crucial choices you’ll ever make. If you’re still unsure which type of main board for 3d printer is best for you, I recommend comparing the characteristics and functionalities of the main board for 3d printer listed above. Each has advantages and disadvantages.

5. Why should I buy a?

You can tell if you need or want a main board for 3d printer by looking at your existing inventory. You probably don’t need it and should reconsider buying it. If you can’t get go of the old one, you could sell it and use the proceeds to buy the new one.
This is a fun and easy approach to finish your task.

Final Thoughts

Let’s face it, we all want to feel good about our purchases. But there are so many! How can you know which is best? You need not be concerned because Aids Quilt has your back. Our trained staff is here to help you find what works for you. Before making a final decision, you can take advantage of our free consultations. Let us show you how easy shopping for home audio equipment can be when you have an expert on your side!

Leave a Comment