Top 10 Best Gps Receiver For Raspberry Pi Of 2022 – Review And Buying Guide

Are you seeking for the gps receiver for raspberry pi on the market? If you answered yes, you are lucky because you have arrived at the greatest possible spot. We are here to save you time and stress from reading endless reviews.

It is fairly typical to be perplexed regarding which gps receiver for raspberry pi to buy. This difficulty occurs because to the wide variety of gps receiver for raspberry pi available on the market. To help you choose the finest gps receiver for raspberry pi available on the market, we have produced a detailed guide.

10 gps receiver for raspberry pi: Editor Recommended

Our Editor 10 gps receiver for raspberry pi Review:

1. Onyehn VK-162 G-Mouse USB GPS Dongle Navigation Module/GPS USB Engine Board External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux

Features :

  • VK-162 GPS support for windows and for linux system, not for android and IOS system
  • The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
  • For amateur radio operators who need accurate timing for digital communications, this is a unit that will help synchronize the timing for those modes.
  • This device is extremely accurate. It usually takes a couple of seconds to acquire the initial fix, followed up shortly by acquiring additional satellites for a more precise fix.

2. G72 G-Mouse USB GPS Dongle Glonass Beidou GNSS Receiver Module for Raspberry Pi Linux Window Geekstory, Better Than vk-172 GPS

Features :

  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us
  • G72 gps usb use the newer chip, better than vk-172 gps.This usb gps works with Windows, Linux and Google Earth, not for IOS Android
  • The device defaults to GPS+Beidou, GPS+Glonass needs to send instructions to change
  • You need to install driver before use it on window, but plug and play for raspberry pi.
  • How to Setup GPS for Raspberry Pi? Please contact me

Additional Info :

Item Dimensions
Height 0.787401574
Width 1.181102361
Length 2.362204722
Weight 0.024375

3. VK-162 G-Mouse USB GPS Dongle Navigation Module External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux Geekstory

Features :

  • VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.
  • If you have any issue when using our product,or you need product use documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us
  • The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
  • It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room
  • This usb gps can be used for mac computer, but it requires very professional technical skills.

4. USB GPS Receiver Antenna Gmouse for Laptop PC Car Marine Navigation/Stratux/Raspberry Pi

Features :

  • Working process: Menu-> Receiver->Port or SensorAPI to get data from GPS Receiver after instialled U-CENTER V8.2X GNSS software (Software can be downloaded from CD-ROM and Official website)
  • Compatible: Win 10/ Win 8/ Win 7/Vista/XP/98/CE. Free GNSS Evaluation Software. 56-Channel All-IN-VIEW Tracking
  • U-BLOX 7 Chipset inside, USB Port, Magnetic base, High sensitivity and Strong Singal,Protocol: NMEA 0183/ Japan QZSS/ India Gagan/ WAAS/ EGNOS/ MSAS Support. High Tracking Sensitivity
  • Cable Length 6.5 Ft / 2 Meters , IPX4 Water Resistance / Dust-tight.
  • Support OpenCPN on Raspberry Pi, Realtime Google Earth Pro and maps. 1 Year Warranty

Additional Info :

Color G MOUSE
Item Dimensions
Height 1.968503935
Width 1.968503935
Length 78.7401574

5. VK-162 G-Mouse – Remote Mount USB – External GPS Navigation Dongle – Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux

Features :

  • MULTI-PLATFORM: Supports Stratux, Raspberry Pi, Google Earth, Windows, Linux
  • STRATUX READY: plug and play and supported by Stratux project.
  • LONG CORD: 7 ft. cord for remote mounting with magnetic base.
  • UPDATED CHIP: u-blox 7 chipset, WAAS capable.
  • DURABLE: IPX6 waterproof / dust-tight.

Additional Info :

Color clear 105
Item Dimensions
Height 0.4
Width 2.8
Length 4.8
Weight 0.15625

6. DIYmalls VK-162 G-Mouse USB GPS Dongle Remote Mount USB GPS Receiver Antenna with Flash for Window Raspberry Pi Linux Google Earth New Chip

Features :

  • Different from old version vk-162 gps, this vk-162 usb gps dongle uses the newer 8th chip.
  • VK-162 gps support windows and linux system, not compatible with android and IOS
  • You need to install driver before make it work on window, but plug and play for linux. Please check document link in picture.
  • vk-162 remote mount usb gps has flash to save setting. It makes you use gps receiver more convenient next time.
  • If you have any problem, please contact seller as follow: click “DIYmalls”(you can find “Sold by DIYmalls” under Buy Now button), in the new page, click “Ask a question”.

Additional Info :

Item Dimensions
Weight 0.14375

7. DIYmall VK-172 VK 172 Gmouse G-Mouse USB GPS Dongle Glonass Support Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker (Pack of 1pc)

Features :

  • Works with Windows,Andorid,Linux,Raspberry pi.Support Google Earth.It can not work with IOS system.
  • Raspberry pi and linux no need driver.
  • The default output is the product GPs protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
  • Note: This dongle only can work outdoor. If you want to let it work indoor, you need have GPS amplifier. Otherwise the GPS can not lock.
  • If you need some driver links and using videos for VK-172,Please contact us.

Additional Info :

Color Pack of 1pc
Item Dimensions
Height 4.33
Width 0.39
Length 5.91
Weight 0.03

8. BN-220 Dual GPS Glonass Module Navigation TTL Level 9600bps + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory

Features :

  • BN-220 has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
  • When you use it for Raspberry Pi, there is no driver needed but you need to install software
  • The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
  • Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
  • The product documentation link cannot be displayed. If you need technical documentation, please click “Geekstory”(you can find “Sold by Geekstory” under Buy Now button), in the new page, click “Ask a question” to email us

Additional Info :

Item Dimensions
Weight 0.0125

9. MAX-M8Q GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Multi-Constellation Receiver Support, GPS, Beidou, Galileo, GLONASS

Features :

  • This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.
  • Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location. A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity. Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports U-Center, an easy way to config the module. Supports DDC (I2C compliant) interface: up to 400KHz (max)
  • Onboard USB TO UART converter CP2102 for serial debugging. Breakouts the module’s UART and I2C interface, for connecting with host boards like Arduino/STM32. Baudrate range: 4800~921600bps (9600bps by default). Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts.

Additional Info :

Color MAX-M8Q GNSS HAT

10. Stemedu VK172 USB GPS Dongle Module Vk-172 GPS/GLONASS USB Navigation, Works for Stratux Windows 10 Linux Mac, for Arduino Raspberry PI Google Earth

Features :

  • 🚩 This VK-172 usb gps glonass module can support Windows Andorid Linux sytem, Raspberry PI and EMGRAND car and Google Earth.
  • 🚩 The default output of Vk 172 g-mouse is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
  • 🚩 Plugged this VK 172 USB dongle module into linux machine, detected as ttyACM0. No additional drivers or configuration required
  • 🚩 You need install the driver before use it, and you can find the User Manual [pdf ] / User Guide [pdf ] on this listing page – Technical Specification
  • 🚩 Please contact us for some driver links and using videos for VK-172 if you need. How to email us? Please click “Stemedu” (you can find “Sold by Stemedu” under Buy Now button), in the new page, click “Ask a question” to email us

Additional Info :

Color White
Item Dimensions
Height 0.393700787
Width 1.181102361
Length 2.362204722

Important Aspects to Consider When Choosing gps receiver for raspberry pi:

How we Picked the Top gps receiver for raspberry pi

Most of the items mentioned are not hand-picked. The list was generated by AI. But we can guarantee that every product included here has been tried and tested by real people, reviewed by experts, and recommended by real people.

Cost

Cost and performance are essential factors to consider when acquiring a gps receiver for raspberry pi. More enterprises entering the gps receiver for raspberry pi market means more options for quality and performance. The most expensive gps receiver for raspberry pi does not always indicate the best decision for you and your money. Many low-cost models offer excellent performance and comfort.

Branding

A brand with high-quality products and outstanding customer service is the ideal choice for gps receiver for raspberry pi. Good brand products are created with extreme care and precision, and they will always be available to answer your questions, correct any product flaws, or refund your money if any damage is found.

Specifications

Before you click the buy now button or add items to your shopping cart, make sure the product fulfills your requirements.
Specs matter while choosing a product. They define the product’s capabilities. With so many options available, it’s vital to pick the correct one.
Choose the gps receiver for raspberry pi precision-engineered to fit your demands.
Performance, features, and affordability are the three primary factors to consider when comparing specifications. Each of these criteria has a role in your final choice. Considering all of them ensures you got the most value for money.

Design

The world is filled of great gps receiver for raspberry pi, making it difficult to choose. A decision can be made by looking at the design. Materials used in manufacture, color scheme, and even visual weighing all contribute to a product’s overall design. Knowing this can help you locate a product that exactly meets your tastes and demands.

Customer Ratings

Many individuals consider customer reviews while making purchase selections. It’s easy to see why: who knows a product better than those who have used it? When deciding which product to buy, looking through customer reviews can give you a good indication of how others felt about their experience. Not everyone will enjoy every product, and some people will be more likely to post a review than others. Overall, customer evaluations are a good reflection of how happy people are with a product.

Stability and Control

We weighed the stability and control of a gps receiver for raspberry pi in determining its performance.
Keep in mind the item’s stability and control.
We consider the product’s impact on our lives and how we will feel when utilizing it.

Comfort

Nobody likes to be uncomfortable or constrained when doing what they love. When deciding whether to use a product, consider its comfort gps receiver for raspberry pi. There are various sorts of gps receiver for raspberry pi that provide stability, control, and comfort. If you buy a fishing kayak, you don’t want to spend the whole trip thinking about how badly you want to get out because your back hurts or your feet are tired.

Durability

The manner a gps receiver for raspberry pi is designed and built, as well as the material used, determine its durability. Select the  gps receiver for raspberry pi that can tolerate wear, pressure, and damage.

Also, make sure it has a streamlined style that fits everywhere. A busy mom or a construction worker will appreciate this product’s durability.

What Are Today’s Most Popular gps receiver for raspberry pi Models?

There are many gps receiver for raspberry pi items accessible today for men and women seeking quality and reliability. Every gps receiver for raspberry pi model follows the same essential premise. But they appeal to various users.
It’s no secret that certain products appeal to specific populations. What if you could see which products were the most popular across all consumers? You can, and we’ve got the list. Check out our collection of products that appear to appeal to all ages, genders, and locations.

How to Choose the Most Popular gps receiver for raspberry pi

The three most crucial criteria to consider are price, quality, and popularity.
Price is an obvious factor to consider, as you want to ensure it is acceptable for your needs.
Quality should also be examined because buying a low-quality goods will not help you achieve your main aim of obtaining the best product.
Finally, while not as obvious as price or quality, popularity can be just as significant as both when it comes to attracting new customers.

FAQ’s

1: How much is gps receiver for raspberry pi?

gps receiver for raspberry pi come in a variety of designs and pricing ranges. It’s difficult to predict product costs nowadays. You don’t know how much something costs because the pricing range is so vast. For example, a pair of pants can range from $20 to $200 depending on where you buy them. Similarly, additional goods like as gps receiver for raspberry pi.

2. Is gps receiver for raspberry pi worth it?

We are, without a doubt, a disposable civilization. We’re continually assaulted with ads advertising the latest and greatest gps receiver for raspberry pi. But are they gps receiver for raspberry pi worth our money? Some of them are if you pick wisely! Some, not so much.

3. Is it time to get a new gps receiver for raspberry pi

You’re looking for a new gps receiver for raspberry pi. What do you think? It’s difficult to predict future price changes. If there are no signs of production slowing, it can be worth buying now to enjoy your investment sooner. But if output is declining and prices are predicted to rise, you might want to wait until the buzz has died down before making a choice.

4. What is the gps receiver for raspberry pi?

Sorry if you’re perplexed. I know it’s not an easy choice! But it’s one of the most crucial choices you’ll ever make. If you’re still unsure which type of gps receiver for raspberry pi is best for you, I recommend comparing the characteristics and functionalities of the gps receiver for raspberry pi listed above. Each has advantages and disadvantages.

5. Why should I buy a?

You can tell if you need or want a gps receiver for raspberry pi by looking at your existing inventory. You probably don’t need it and should reconsider buying it. If you can’t get go of the old one, you could sell it and use the proceeds to buy the new one.
This is a fun and easy approach to finish your task.

Final Thoughts

Let’s face it, we all want to feel good about our purchases. But there are so many! How can you know which is best? You need not be concerned because Aids Quilt has your back. Our trained staff is here to help you find what works for you. Before making a final decision, you can take advantage of our free consultations. Let us show you how easy shopping for home audio equipment can be when you have an expert on your side!

Leave a Comment