Top 10 Best Digital Multiplexers Of 2022 – Review And Buying Guide

Are you seeking for the digital multiplexers on the market? If you answered yes, you are lucky because you have arrived at the greatest possible spot. We are here to save you time and stress from reading endless reviews.

It is fairly typical to be perplexed regarding which digital multiplexers to buy. This difficulty occurs because to the wide variety of digital multiplexers available on the market. To help you choose the finest digital multiplexers available on the market, we have produced a detailed guide.

10 digital multiplexers: Editor Recommended

Our Editor 10 digital multiplexers Review:

1. Ximimark 5Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module For Arduino

Features :

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx).
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to. If you want two-way communications,you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).

Additional Info :

2. HiLetgo CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

Features :

  • Function: Use 16 ADCs to collect 16 analog signals.
  • Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
  • Analog output: DIG;Channel control: S0-S3
  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.

Additional Info :

Color Blue

3. 12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with Ardu&ino DIY

Features :

  • CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels; Analog output: DIG; Channel control: S0-S3
  • It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller’s TX line to 16 device’s RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc.
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
  • To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins.
  • Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devices. For example, you could use it to connect the TX pins of 16 devices to one RX pin on your microcontroller. You can then select any one of those 16 devices to listen to.

Additional Info :

4. DAOKI 10pcs CD74HC4067 16-Channel Analog Digital Multiplexer Breakout Board Module for Arduino 2V-6V Microcontroller 16 Device RX Lines

Features :

  • To achieve fast turn-on and off the circuit, an unlimited number of switching;
  • Conducting and cutting process does not produce noise, no spark, no electromagnetic interference;
  • Compared with electromagnetic relay products, longer life;
  • The dual-MOS parallel drive, lower resistance, more current, strong power; at room temperature, operating current of up to 15A, power up to 400W, to meet the most use of the equipment;
  • A method for controlling the motor, lights, LED, DC motors, micro-pumps, solenoid valves, etc., very convenient.

5. Acxico 11Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module

Features :

  • This is a breakout board for the very handy 16-Channel Analog Digital Multiplexer Demultiplexer CD74HC4067. This chip is like a rotary switch it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins.
  • The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”).
  • The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!
  • Package Included:11Pcs 16CH Analog Digital Multiplexer Breakout Board Module CD74HC4067 CMOS Precise Module(If there are any problems with the product, please send us pictures.Tell us more details about this problem.)
  • Thank you so much for your purchasing from our store.Any question ,please feel free to contact us.

6. UMLIFE 6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

Features :

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
  • IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • Analog output: DIG;Channel control: S0-S3
  • Wide operating temperature range: -55C to 125C

7. DEVMO 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY

Features :

  • ★This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • ★2V to 6V operation
  • ★6ns break-before-make @ 4.5V,”On” resistance: 70 Ohms @ 4.5V
  • ★Wide operating temperature range: -55C to 125C
  • ★Package Includes: 1PCS 16 Ch. Mulitplexer,2PCS Header Pins as shown above

Additional Info :

8. Exanko 10Pcs 16CH Analogue Multiplexer Module 74HC4067 CD74HC4067 Precise Module Digital Multiplexer MUX Breakout Board

Features :

  • Because the multiplexer can also process digital signals, you can use it to transfer TTL-level serial data to multiple devices through pipe or transfer from multiple devices.
  • It is suitable for digital and analog signals (voltage cannot be higher than VCC) and can be connected in either direction. To control this, please connect the four digital outputs to the address selection pin of the chip (SO-S3) and send it the binary address of the desired channel.
  • This is a very convenient 16 channel CD74HC4067 analog/digital multiplexer/demultiplexer.
  • Drive it to a high level, and it will completely disconnect the common pins (all switches are disconnected).
  • The internal switch is bidirectional, with a low on resistance and off leakage, and to prevent cross talk, please turn off the switch first and then on.

Additional Info :

Color blue
Item Dimensions
Height 0.787401574
Width 1.574803148
Length 2.362204722
Weight 0.08708259349

9. DollaTek CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino – 5pcs

Features :

  • Use 16 ADCs to collect 16 analog signals.
  • Use the CD74HC4067 16-channel analog signal switch;Analog signal input: C0-C15 16 channels.
  • Analog output: DIG;Channel control: S0-S3
  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067.
  • This chip is like a rotary switch – it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx)

10. Analog/Digital MUX Breakout for Arduino

Features :

  • 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067
  • ON Resistance 70Ohms @ 4.5Vcc and 60Ohms @ 6VCC
  • 2V to 6V operation

Important Aspects to Consider When Choosing digital multiplexers:

How we Picked the Top digital multiplexers

Most of the items mentioned are not hand-picked. The list was generated by AI. But we can guarantee that every product included here has been tried and tested by real people, reviewed by experts, and recommended by real people.

Cost

Cost and performance are essential factors to consider when acquiring a digital multiplexers. More enterprises entering the digital multiplexers market means more options for quality and performance. The most expensive digital multiplexers does not always indicate the best decision for you and your money. Many low-cost models offer excellent performance and comfort.

Branding

A brand with high-quality products and outstanding customer service is the ideal choice for digital multiplexers. Good brand products are created with extreme care and precision, and they will always be available to answer your questions, correct any product flaws, or refund your money if any damage is found.

Specifications

Before you click the buy now button or add items to your shopping cart, make sure the product fulfills your requirements.
Specs matter while choosing a product. They define the product’s capabilities. With so many options available, it’s vital to pick the correct one.
Choose the digital multiplexers precision-engineered to fit your demands.
Performance, features, and affordability are the three primary factors to consider when comparing specifications. Each of these criteria has a role in your final choice. Considering all of them ensures you got the most value for money.

Design

The world is filled of great digital multiplexers, making it difficult to choose. A decision can be made by looking at the design. Materials used in manufacture, color scheme, and even visual weighing all contribute to a product’s overall design. Knowing this can help you locate a product that exactly meets your tastes and demands.

Customer Ratings

Many individuals consider customer reviews while making purchase selections. It’s easy to see why: who knows a product better than those who have used it? When deciding which product to buy, looking through customer reviews can give you a good indication of how others felt about their experience. Not everyone will enjoy every product, and some people will be more likely to post a review than others. Overall, customer evaluations are a good reflection of how happy people are with a product.

Stability and Control

We weighed the stability and control of a digital multiplexers in determining its performance.
Keep in mind the item’s stability and control.
We consider the product’s impact on our lives and how we will feel when utilizing it.

Comfort

Nobody likes to be uncomfortable or constrained when doing what they love. When deciding whether to use a product, consider its comfort digital multiplexers. There are various sorts of digital multiplexers that provide stability, control, and comfort. If you buy a fishing kayak, you don’t want to spend the whole trip thinking about how badly you want to get out because your back hurts or your feet are tired.

Durability

The manner a digital multiplexers is designed and built, as well as the material used, determine its durability. Select the  digital multiplexers that can tolerate wear, pressure, and damage.

Also, make sure it has a streamlined style that fits everywhere. A busy mom or a construction worker will appreciate this product’s durability.

What Are Today’s Most Popular digital multiplexers Models?

There are many digital multiplexers items accessible today for men and women seeking quality and reliability. Every digital multiplexers model follows the same essential premise. But they appeal to various users.
It’s no secret that certain products appeal to specific populations. What if you could see which products were the most popular across all consumers? You can, and we’ve got the list. Check out our collection of products that appear to appeal to all ages, genders, and locations.

How to Choose the Most Popular digital multiplexers

The three most crucial criteria to consider are price, quality, and popularity.
Price is an obvious factor to consider, as you want to ensure it is acceptable for your needs.
Quality should also be examined because buying a low-quality goods will not help you achieve your main aim of obtaining the best product.
Finally, while not as obvious as price or quality, popularity can be just as significant as both when it comes to attracting new customers.

FAQ’s

1: How much is digital multiplexers?

digital multiplexers come in a variety of designs and pricing ranges. It’s difficult to predict product costs nowadays. You don’t know how much something costs because the pricing range is so vast. For example, a pair of pants can range from $20 to $200 depending on where you buy them. Similarly, additional goods like as digital multiplexers.

2. Is digital multiplexers worth it?

We are, without a doubt, a disposable civilization. We’re continually assaulted with ads advertising the latest and greatest digital multiplexers. But are they digital multiplexers worth our money? Some of them are if you pick wisely! Some, not so much.

3. Is it time to get a new digital multiplexers

You’re looking for a new digital multiplexers. What do you think? It’s difficult to predict future price changes. If there are no signs of production slowing, it can be worth buying now to enjoy your investment sooner. But if output is declining and prices are predicted to rise, you might want to wait until the buzz has died down before making a choice.

4. What is the digital multiplexers?

Sorry if you’re perplexed. I know it’s not an easy choice! But it’s one of the most crucial choices you’ll ever make. If you’re still unsure which type of digital multiplexers is best for you, I recommend comparing the characteristics and functionalities of the digital multiplexers listed above. Each has advantages and disadvantages.

5. Why should I buy a?

You can tell if you need or want a digital multiplexers by looking at your existing inventory. You probably don’t need it and should reconsider buying it. If you can’t get go of the old one, you could sell it and use the proceeds to buy the new one.
This is a fun and easy approach to finish your task.

Final Thoughts

Let’s face it, we all want to feel good about our purchases. But there are so many! How can you know which is best? You need not be concerned because Aids Quilt has your back. Our trained staff is here to help you find what works for you. Before making a final decision, you can take advantage of our free consultations. Let us show you how easy shopping for home audio equipment can be when you have an expert on your side!

Leave a Comment